Price List


Big Block Chevy Intake System
Multi-Point Systems:

Small Block Chevy to 500hp$3250.00
Big Block Chevy (oval, orrectangular ports, to 550hp)$3295.00


Note: For Systems over700hp we recommend upgrading to the 2000cfm throttle body and theSX Fuel System Component Package.



Force Conversions:

All through 500 hp call for systems above 500 hp
(Includes labor on customer supplied manifold)

1 set of injector bosses. (Installed oncustomer provided manifold)
1 1000cfm billet throttle body w/ TPSand IAC installed.
2 Fuel Rails. (machined to fit customersupplied manifold and mounted)
Billet fuel pressureregulator.
Injectors to 600 HP.
Holley HP ecu and harness, 1 bar MAP, Air,Coolant and wideband O2 sensor.
Software and Programming cable.
EFI Fuel Pump.
$3250.00


assume-xml-procins: false
Force EFI forBlowers:

8Injector System for engines up to700hp.

Polished bugcatcher - machined for EFI
Injector Plate - polished
Fuel rails for 8 injectors - polished and anodized
8 injectors - to 700 HP.
Billet adjustable fuel pressureregulator
Billet fuel pump good to 900 HP
Billet fuel filter (EFI)
Pre-programmed Holley HP ecu w/ wide band O2(Programmable)
Custom harness
All sensors, software, interface cable, diagrams andinstructions.
$5450.00

8 Injector System for engines up to 1200hp.

Polished bugcatcher - machined for EFI
Injector Plate - polished
Fuel rails for 8 injectors - polished and anodized
8 injectors - to 1400 HP.
Billet adjustable fuel pressureregulator
Billet fuel pump good to 1400 HP
Two Billet fuel filters (EFI)
Pre-programmed Holley HP ECU w/ wideband O2(Programmable)
Custom harness
All sensors, software, interface cable, diagrams andinstructions.
$5850.00

8Injector Hardline System for engines to 700hp


Polished bugcatcher
Injector Plate-polished
SS hardline lines and fittings
8 injectors - to 700 HP.
Billet Fuel pressure regulator
Billet Fuel pump
Two Billet fuel filters (EFI)
Pre-programmed Holley ECU w/ wideband O2(Programmable)
Custom harness
All sensors, software, interface cable, diagrams andinstructions.
$6250.00

Custom configurations available.  Callfor Details



Force StackSystems:

Small BlockChevy:
1 SBC "stack" Manifold
1 Set 12" ram tubes
1 Set of machined fuel rails
Lines & fittings
Billet Fuel regulator
1 Set of injectors up to 36 lbs./hr
Fuel pump
1 Holley HP ECU with WideBand O2 sensor and custom harness,
and TPS, MAP, Air & Coolant temp sensors and software. $6350.00

Big BlockChevy :
Stack Manifold w/ 2 5/8" butterflies
1 Set 8" spun aluminum ram tubes
Machined and polished fuel rails
Lines & fittings for this system
Billet fuel pressure regulator
1 Set of injectors up to 42 lbs./hr
1 EFI fuel pump
1 Holley HP ECU with WideBand O2 sensor (preprogrammed)
Custom Harness
and TPS, MAP, Air & Coolant temp sensors and software. $6550.00

Note:: The abovesystems are not recommended for vehicles equipped with power brakesunless used with a electronic vacuum supply..



Aeromotive Products:

11101 Billet aluminum fuel pump - rated to800-1000 hp$360.00
11104 Billet aluminum fuel pump - rated to1100-1600 hp $545.00
11102 Billet aluminum fuel pump - rated to1450-2000 hp $760.00
Aeromotive billet fuel filter (matches pump)$105.00
Aeromotive billet fuel pressure regulator,adjustable 35-90 psi $160.00
Fuel pressure gauge, 0-100psi,liquid-filled, stainless $19.95


Force Throttlebodies:

1000 cfm t-body

1000cfm 4 bbl -Progressive linkage, (billet aluminum, includes TPS &IAC) $575.00

2000 cfm t-body
2000cfm 4 bbl - Progressive linkage, (billetaluminum, includes TPS & IAC) $675.00



Manifolds:
SBC, specify early or late heads $375.00
BBC, oval or rect port, specify std or talldeck, 4150 or 4500 opening $425.00
Fuel rail set for above, specify intake$125.00
Conversion by welding, including bosses andfuel rail $425.00 andup
Crossover lines and rail mount fuel pressureregulator for above $250.00



Components:

Aluminum Fuel Rail - .500" (1/2") I.D. perfoot$10.00
Injector bosses, weld or epoxy, set of8 $60.00
Fuel pump, EFI 60 gph, std. w/systems$125.00
Fuel pressure regulator, vacuum, w/ ANadapter $99.00
Fuel pressure gauge, 0-100 psi, liquidfilled, stainless $19.95


Electronics:

Haltech Sprint 500, air &coolant temp sensors, software and cable, flying lead $995.00
Haltech Sport 1000, air& coolant temp sensors, software and cable, flying lead$1725.00
Haltech Sport 2000, air& coolant temp sensors,software and cable, flying lead$2177.00
GEN VII Accel / DFI (for HEI distributor orfuel only) w/ MAP, air & coolant temp and O2sensor.$1675.00
GEN VII Accel / DFI (for use w/ MSDdistributor) w/ MAP, air & coolant temp and O2sensor.$1695.00
GEN VII Accel / DFI (LT1/LT4) w/ MAP, air& coolant temp and O2 sensor.$1685.00
GEN VII Accel/DFI (Honda) w/ MAP, air &coolant temp and O2 sensor.$1665.00
Substitute 2 or 3 bar MAP sensor$75.00
Wide Band Oxygen Sensor option for GEN VIIAccel/DFI $965.00



FAST XFI - sequential , w/ full harness, wide band O2, MAP, air & coolant temp sensors
$2195.00

FAST XFI - sequential w/ full harness, wideband O2, w/ MAP, air & coolant temp sensors - for LS1, LS2, LS6, LS7
$2750.00

Custom harnesses are available for the above ECU'sat additional cost. Please call fordetails


Business hours are weekdays, 9:00 a.m to 5:30 p.m. EST
Telephone (305) 235-6160

disc  MC  visa

 assume-xml-procins: false assume-xml-procins: false assume-xml-procins: false